Installation procedure

Important

You must completely uninstall any previous “developer release” or “early access” version of this product before installing this release.

Warning

The visionCATS installation requires to be explicitly launched by an user with administrator rights. Run the installer by using the Run as administrator command.

Warning

Make sure you have the latest Windows updates and drivers installed. The installation will fail if Windows is already installing updates or if a reboot is pending.

Warning

At installation the PC should have the final name and should be in the finally used domain (name change of PC and/or domain after installation is not supported). All PCs of one visionCATS installation need to be in the same domain.

  • Insert the DVD into the DVD drive, browse the DVD drive and start the installation by right-clicking the *visionCATS*.exe file and selecting Run as administrator.

  • If Windows Firewall is activated, you will probably see the following warning. Indeed, the visionCATS installer tries to communicate with previous installations of visionCATS and, in case of a client installation, tries to contact the server installation. Please hit Allow access (or perform the modification manually in Windows Firewall) to configure your Windows Firewall accordingly:

../../_images/WindowsFirewallWarning.png

Note

Depending on the firewall currently activated, you may see either warning popups, or no popup at all. In this last case, you will have to check your firewall settings manually.

  • After having accepted the license terms, follow the instructions:

../../_images/install.png

Important

Installation decision: server only, full or client.

  • In the Mode tab:

    • Full (default): installs the Server, Client, HPTLC PRO Instrument Service and HPTLC Instrument Service components. Use this option:

      • For a standalone installation

      • To install a non-virtualized Server of a cluster installation on a machine that could eventually access to CAMAG instruments

    • Server only: use this option to install the server of a clustered installation, possibly on a virtual machine.

    • Client: installs the visionCATS Client application

      • Specify the host name and port of the server. A host name or IP address should be entered directly.

        Note

        As recent versions of Windows don’t support the network discovery anymore, it is not possible to pre-fill this field with possible hosts.

    For each mode, it is possible to select which Instrument Service will be installed, and the corresponding ports. By default, for Full and Client, both HPTLC PRO Instrument Service and HPTLC Instrument Service are installed, but none for Server only.

Warning

When updating, always update the server before the client(s).

Note

The Backup Tool, the Service Tool and the Method Library standalone downloader are always installed along with the Server.

Note

Do not change the server and instrument server port without any serious reason! If you have to change the ports, note the changed values in the log-book of the software or at a respective document.

  • Choose the location of the program, the images and other data:

../../_images/location.png

Warning

The data will be accessed with the Local System account. Network drive will not be accessible. Please check that this account has access to the specified folder.

  • User Management option

Note

Only available for the server as it is common for the whole system.

../../_images/option.png
  • Install the client(s)

    For each succeeding installation in the same cluster choose Client and search for the respective machine the server is installed on. A client can be installed with or without an instrument service (you need an instrument service if you want to connect one or more instrument on the computer). If you want to install several visionCATS clients in office places, where you will never connect any instrument, these clients can be installed without instrument service, so that only needed instrument services will be registered in the system.

Important

In order for your visionCATS server to appear, the client and server hosts should be on the same network and have File Sharing enabled (available in Network and Sharing Center).

Note

For IT administrators, visionCATS also provides installation automation by using command-line arguments. Please contact your local CAMAG distributor for more information.

Post installation

Follow the steps in Post Installation.

Troubleshooting

At any moment, if some error occurs, you can get all log files related to the visionCATS installation, by clicking on the below left button.

../../_images/installlogs.png

For more information, see Installer logs.